Posts: 43
From:
Registered: Dec 2000

posted 12-27-2000 03:41 PM               

---

I am trying to make puzzle in which two puzzle pieces have to be placed in two different holes before the flipmap will work.
I know you have to do something with the 1-5 numbers but I have no clue what. If you can help please do.
Thank Ya

IP: Logged

Posts: 278
From:Niagara Falls, Ontario, Canada
Registered: Nov 2000

posted 12-27-2000 06:49 PM               

---

You must set the object code bits for each puzzle receptacle. Turn code bits 1 and 2 on for the first receptacle, turn 3,4 and 5 on for the second receptacle. Trigger the flipmap to both of the squares that contain the receptacles, and set the triggers as "key" triggers. I have yet to try this myself, but as far as I know, that is how it is done. Let me know if this helps.

------------------
Just putting in my two cents.

IP: Logged

Posts: 102
From:Phoenix, Arizona, USA
Registered: Dec 2000

posted 12-27-2000 07:05 PM               

---

I have actually used this before and it does work. I used two puzzle pieces to open a door, but it should also work to trigger a flipmap. Post again if you have trouble.

IP: Logged

Posts: 43
From:
Registered: Dec 2000

posted 12-27-2000 10:20 PM               

---

Thanks Guys, I finally figured got it.

IP: Logged