|
Author
|
Topic: Pickup trigger refuses to work... Go figure...
|
CuriousRom
Member Posts: 217
From:Hérouville France
Registered: May 99
|
posted 12-28-2000 04:32 AM
  
Well, I set up my trigger like this :
1) Set the object as a pickup trigger
2) Stacks on top of it a CD and flyby triggerIt won't work... Why ? When I do the same with a switch, using the switch trigger of course, things work perfectly... IP: Logged |
Modash
Junior Member Posts: 6
From:
Registered: Dec 2000
|
posted 12-28-2000 08:27 AM
are you trying to do a pickup on a podium? It might apply to all pickups but the pickup object should be set to 68 by selecting it and pressing O and typing it in the box.Maybe thats it or maybe its that special trigers can be overlaid with normal triggers.
I'd do this (i may be wrong thought): 1) put the object to pickup down and change its properties to 68.
2) select the tile below the pickup and set it as a trigger. Change the trigger properties and set it as a pickup.
3) select the camera and add the trigger to the pickup square.
4) add the cd track to the square. You may not need the 68 bit. I think that only applies to objects on podiums. Hope this helps.
 IP: Logged |
CuriousRom
Member Posts: 217
From:Hérouville France
Registered: May 99
|
posted 12-29-2000 05:29 AM
I got it to work !I read carefully the manual last night and found out that I need to use OCB 64 to make the object a pickup trigger object !
You were close Modash  Unfortunately the object lies on the floor... But would look cool on a pedestal or something... Thanks anyway ! IP: Logged |
Modash
Junior Member Posts: 6
From:
Registered: Dec 2000
|
posted 12-29-2000 07:23 AM
hey. I try. I havent used objects on the floor yet. Maybe thats something ill try. Ill have a gander at that manual to find the ocb codes.IP: Logged |
Eidos Interactive Forums
UBBFriend: Email This Page to Someone! 
